Xhorse VVDI Key Tool Plus Pad

The best in one tool

Xhorse VVDI Key tool Plus Pad is the most complete programmer for programming vehicle keys and offers professional results with maximum ease of use.

Thanks to the built-in touchscreen, you can carry out all the operations you need without having to connect a computer or smartphone.

It is an AIO tool because it includes all the features of other XHORSE products such as VVDI 2, VVDI Mb, Key Tool Max, VVDI Bim, VVDI Prog, Obd Helper.

Key Tool XHORSE More Key Programming

Maximum Compatibility

VVDI Key Tool Plus allows you to offer numerous services for the automotive field, such as key programming, remote generation, cloning, transponder detection, key learning, ECU coding/adaptation/replacement, and diagnostic functions.

All in a single interface within everyone's reach. It supports IMMO programming for the most common vehicles and also for luxury cars such as BMW, BENZ, AUDI, and VW for a total of more than 20,000 supported models.

It is compatible with key duplicator machines xhorse.

Based on the Android operating system, Key Tool Plus has a powerful 2GHz 8-core processor, 4GB of RAM, and 128GB of internal memory on board. The view of the interface is clear thanks to the 10.1-inch HD anti-glare display.

Plus, work worry-free thanks to the 10000mAh battery with 30W fast charging.

In addition, it also supports Bluetooth 5.0 and dual-band 2.4 Ghz and 5 Ghz Wi-Fi connections and is equipped with a 13-megapixel camera. Regular updates are free of charge.

For all vehicle models with a high immobilizer protection system and in which OBD programming cannot be performed, the File Make Key function allows bench programming to overcome the protection obstacle. It also supports DOIP, CAN-FD, CAN, and K protocol switching pin, chip pin detection, simulator-free Toyota smart key programming, supports long-distance IMMO collection.

Integrated Components: OBD Matrix Switch, Radio Frequency Simulator, Smart Key Simulator, Integrated Key Identification Coil, BENZ Infrared Readout. Compatible with reading and writing EEPROM, reading and writing of most types of transponders on the market, programming of BMW IMMO modules, covering CAS3, CAS3+, CAS4, CAS4+, BDC, FRM and FEM, reading of Land Rover's RFA module and IMMO programming, Porsche BCM programming.

And again support for ECU reading with CAN on AUDI, BMW and VOLKSWAGEN and instrument programming on HONDA, KIA and HYUNDAI. For some functions, it is necessary to use specific adapters.

Use VVDI Key Tool Plus with module-specific adapters:

XDNP11 for BMW-CAS3-ADAPTER 

XDNP12 for BMW-CAS4-ADAPTER-VER1.2 

XDNP16 for LANDROVER FOR KVM-ADAPTER-VER1.1 

XDNP17 for PORSCHE-BCM-ADAPTER-VER1.3 

XDNP18 for BMW-FRM-ADAPTER 

XDNP19 FOR MB91F-FOR HONDA-FIT-H 

XDNP20 for HONDA-FIT-L DASHBOARD ADAPTER

XDNP21 FOR SONATA DASH ADAPTER

XDNP25 for KIA K3 DASHBOARD ADAPTER

XDNP26 for KIA K5 DASHBOARD ADAPTER

XDNP27 for VOLVO-KVM-VER1.0 

XDNP28 for VOLVO-CEM.  1

XDNP29 ADAPTER for VOLVO-CEM.  2

XDNP14 for DB15-DB25-ADAPTER 

XDNP24 for 35080-ADAPTER

VVDI Key Tool Plus Features:

1. Powerful Functions:

Supports DOIP

Supports CAN-FD

Supports CAN and K protocol switch pins

Supports chip pin detection

Supports Toyota Smart Key Programming Without a Simulator

Supports long-distance IMMO collection

2. Integrated Components

OBD Matrix Switch

Radio Frequency Simulator

Smart Key Simulator

Integrated key identification coil

BENZ Infrared Readout Head

3. All-in-one automotive solution

4. IMMO programming for Benz, BMW, Audi, VW and common car brands: Toyota, Honda, Mazda, Ford, etc.

KEY TOOL PLUS supports more than 20,000 car models worldwide. We can select car brands and car models in the IMMO programming interface. On this smart platform, we can easily find the car models we need by brand area, brand name, and A-Z word search.

5. VVDI Key Tool Plus incorporates programming functions:

Supports EEPROM Read and Write: Supports reading and writing of most types of transponders on the market.

It supports programming of the BMW IMMO module, covering CAS3, CAS3+, CAS4, CAS4+, BDC, FRM, and FEM.

It supports Land Rover RFA module reading and IMMO programming.

Supports Porsche BCM programming.

It supports reading ECUs with CAN on AUDI, BMW, and VOLKSWAGEN.

Supports instrument programming on HONDA, KIA, and HYUNDAI.

(Note: To complete certain functions, users need to connect KEY TOOL PLUS to the specific adapters and get the required model indicator on the interface. This feature is only effective in advanced editing.)

6. Improved IMMO DATA TOOL (FILE MAKE KEY) function

Key programming and certain settings cannot be completed via the OBD port on some car models due to their immobilizer protection system. Through a professional programming method - FILE MAKE KEY, the problem can be easily solved.

[File make key: to generate a car key through a data file. Users need to use the specific device to read the IMMO data and generate a starter transponder to directly start the car, without needing to match the original car. (Users may need to re-enter the data into the IMMO box when performing the programming process on some car models.)]

KEY TOOL PLUS supports the File Make Key feature for common car and motorcycle models. We can easily find the car models we need by brand area, brand name, and A-Z word search.

7. Key Cutter Control XHORSE